Black & Decker Cordless Sander Black & Decker Cordless SanderCordless Sander User Manual

0

Out of 0 Ratings

Owner's of the Black & Decker Cordless Sander Black & Decker Cordless SanderCordless Sander gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 28
 
MAINTENANCE
Use only mild soap and damp cloth to clean the tool. Never let any liquid get inside the
tool; never immerse any part of the tool into a liquid.
IMPORTANT: To assure product SAFETY and RELIABILITY, repairs, maintenance and
adjustment should be performed by authorized service centers or other qualified service
organizations, always using identical replacement parts.
A
ACCESSORIES
A variety of Mouse
®
accessories are available at extra cost. Listings per retailer may vary.
Note: Use only sandpaper with holes in the same configuration as on the base of the
8
• Pushtheotherendofthecontoursandingpieceuntilitclicksintoplace.
• To remove the contour sanding piece, push it forward then pull the rear end out of
the contour holder (g. 7).
Fitting a Sanding Sheet Onto a Contour Sanding Piece (Fig. 8)
• Alignthesandingsheetwiththecontoursandingpiece.
• Pressthesandingsheetontothecontoursandingpiece,making
sure that the sanding sheet follows the shape of the profile.
Dust Extraction (Fig. 9)
To Empty Dust Canister:
• Thedustcanistershouldbeemptiedafterevery10minutesofsanding.
• Whileholdingthesander,graspthedustcollectioncanisterandpulloffofthesander.
• Removethecanisterdoorandgentlyshakeortapthecanisteranddoortoempty.
• Re-attachthedoorandfirmlypushthecanisterbackontothesander.
CAUTION: Respiratory hazard. Never operate this tool for wood sanding unless
the dust canister is in place. Sanding dust exhaust may create a breathing hazard.
WARNING: Fire hazard. Collected sanding dust from sanding surface coatings
(polyurethane, linseed oil, etc.) can self-ignite in sander dust canister or elsewhere and
cause fire. To reduce risk, empty canister frequently and strictly follow sander manual and
coating manufacturer’s instructions.
WARNING: Fire hazard. When working on metal surfaces, do not use the dust canister
or a vacuum cleaner because sparks are generated. Wear safety glasses and a dust
mask. Due to the danger of fire, do not use your sander to sand magnesium surfaces. Do
not use for wet sanding.
TROUBLESHOOTING
Problem Possible Cause Possible Solution
• Unitwillnotstart. •Cordnotpluggedin. •Plugtoolintoaworkingoutlet.
•Circuitfuseisblown. •Replacecircuitfuse.
(If the product repeatedly causes
the circuit fuse to blow, discontinue
use immediately and have it
serviced at a Black & Decker service
center or authorized servicer.)
•Circuitbreakeristripped. •Resetcircuitbreaker.(Ifthe
product repeatedly causes the
circuit breaker to trip, discontinue
use immediately and have it
serviced at a Black & Decker service
center or authorized servicer.)
•Cordorswitchisdamaged. •Havecordorswitchreplacedat
Black & Decker Service Center or
Authorized Servicer.
• Dustisnot •Sandpaperholesdonotalign. •UseMouse
®
sandpaper with the
being collected. appropriate hole configuration.
For assistance with your product, visit our website www.blackanddecker.com for the
locationoftheservicecenternearestyouorcalltheBLACK&DECKERhelplineat
1-800-544-6986.

   Find Your Products By Category