Euro-Pro Blender Euro-Pro Blender User Manual

2.6

Out of 1 Ratings

Owner's of the Euro-Pro Blender Euro-Pro Blender gave it a score of 2.6 out of 5. Here's how the scores stacked up:

  • Reliability

    3.0 out of 5

  • Durability

    2.0 out of 5

  • Maintenance

    3.0 out of 5

  • Performance

    2.0 out of 5

  • Ease of Use

    3.0 out of 5
of 24
 
12
www.ninjakitchen.com
USINGTHE4-BLADEASSEMBLY
1 Holding the 4-Blade assembly by the shaft, place it
onto the gear shaft inside the bowl. Ensure that the
attachment fits around the gear shaft and that it is
standing straight.
2 Add the ingredients and secure the bowl lid onto the
bowl. (Fig. 1)
3 Plug the power cord into the electrical outlet and press
on the power button (
).
4 Select the speed that best suits your needs. Pulse
ingredients for even chopping by pressing down in short
intervals.
NOTE: Please refer to “Speed Settings & Uses” chart for
suggested uses and speeds.
5 When you have reached your desired consistencey, stop
the appliance by pressing the power button
( ) and
wait for the blade to stop turning.
6 To remove the lid, pull the lid handle up to a 90° angle
and lift the lid off. Turn the bowl counter clockwise
and then lift off the base.
(Fig.2,Fig.3)
Fig. 1
Suction
Lever
Fig. 4
USE
Activate
Suction
Release
Suction
Fig. 4a
Fig. 4b
USING THE DOUGH BLADE
IMPORTANT: Use only the “DOUGH” button when using
this attachment.
IMPORTANT: Use the suction lever when using the
dough blade on SPEED 1/DOUGH.
1 Place the motor base on a clean, dry, level surface such
as a counter or table top. (Fig.4) Push the suction lever
on the side of the motor base down to secure the suction
feet to the surface. (Fig.4a) If the suction feet have not
totally adhered to the surface, press down lightly on the
base to give the suction feet a better grip.
2 Secure the bowl onto the motor base.
3 Holding the dough blade by the shaft, place it onto the
gear shaft inside the bowl. Ensure that the attachment
fits around the gear shaft and that it is standing straight.
4 Add the ingredients and secure the bowl lid onto the
bowl.
NOTE: For best results add wet ingredients first and then
add dry ingredients.
5 Plug the power cord into the electrical outlet and press
on the power button (
).
6 Once finished making dough, remove the bowl from the
motor base. (Fig.2,Fig.3)
7 To release the motor base from the counter or table top,
pull the suction lever up to release the suction feet.
(Fig.4b)
NOTE: The suction lever activates the suction feet for
added stability.
Fig. 2
Fig. 3
REMOVAL
USE
BL770_series_30_IB_ENG_120627_3.indd 12 12-06-27 11:55 AM

   Find Your Products By Category