Cuisinart Blender Smart Stick Two Speed Hand Blender User Manual

0

Out of 0 Ratings

Owner's of the Cuisinart Blender Smart Stick Two Speed Hand Blender gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 32
 
11
Note: Due to the powerful motor provided with this unit,
Cuisinart recommends using one hand to support the work
bowl during operation.
5. When you have finished processing the food, stop the machine
by taking your finger off the desired speed button.
6.
WHEN THE BLADE STOPS MOVING, unplug the unit.
7. Remove the motor body with the cover from the work bowl.
8. Carefully remove the chopping blade, holding it by the gripping
ridges on the plastic sheath. NEVER TOUCH THE BLADE
ITSELF
.
9. Remove food with a spatula.
Note: Do not operate the chopper/grinder attachment
without food contents in the work bowl.
WHISKING
1. Insert the whisk attachment into the motor body. (See Assembly
for Whisk Attachment, page 8.)
2. Plug electrical cord into a wall socket.
3. Put the whisk into mixture to be blended.
4. Press and hold the desired speed button. The hand blender will
continue to run as long as the switch is pressed in. To turn hand
blender off, release the speed button and the motor will stop.
CLEANING AND MAINTENANCE
HAND BLENDER
Always clean the motor body and blending shaft thoroughly after
using.
Remove the blending shaft from the motor body. Clean the
motor body only with a sponge or damp cloth. Do not use abrasive
cleaners that could scratch the surface. To clean the blending shaft,
wash by hand in hot water using mild detergent. Be mindful of the
fixed razor-sharp edges.
CHOPPER/GRINDER ATTACHMENT
To simplify cleaning, rinse the work bowl, blade and cover
immediately after use so that food won’t dry on them. Do not
submerge the work bowl cover in water or put in the dishwasher.
Wash chopping blade and work bowl in warm, soapy water. Rinse
and dry. Wipe the underside of the cover with a sponge or damp
cloth to remove any food. Wash the blade carefully. Avoid leaving it in
soapy water where it may disappear from sight.
You can wash the work bowl and chopping blade, on the upper shelf
of your dishwasher. Unload the dishwasher carefully to avoid contact
with the sharp blade. Wipe the motor body and top of the cover
with a damp sponge or cloth. Dry it immediately. Never submerge
the motor body or the cover in water or other liquids. The food
processor attachment is intended for HOUSEHOLD USE ONLY.

   Find Your Products By Category