Schumacher Power Supply IP-1800I User Manual

5.0

Out of 1 Ratings

Owner's of the Schumacher Power Supply IP-1800I gave it a score of 5.0 out of 5. Here's how the scores stacked up:

  • Reliability

    5.0 out of 5

  • Durability

    5.0 out of 5

  • Maintenance

    5.0 out of 5

  • Performance

    5.0 out of 5

  • Ease of Use

    5.0 out of 5
of 37
 
• 9 •
TROUBLESHOOTING7.
PROBLEM POSSIBLE CAUSE REASON/SOLUTION
The Instant Power™ won’t
jump start my car.
Clips are not making a
good connection to the
battery.
Connections are reversed.
The Instant Power™ bat-
tery is not charged.
The vehicle’s battery is
defective.
Check for poor connection
to battery and frame. Make
sure connection points are
clean. Rock clips back and
forth for a better connection.
Disconnect the Instant
Power™ and reverse the
clips.
Check the battery charge
status by pressing the
button on the front of the
Instant Power™. See LED
Indicators section of this
manual.
Have the battery checked.
The Instant Power™ won’t
power my 12V device.
The 12V device is not
turned on.
The Instant Power™ bat-
tery is not charged.
The 12V device draws
more than 15A or has a
short circuit
Turn on the 12V device.
Check the battery charge
status by pressing the
button on the front of the
Instant Power™. See LED
Indicators section of this
manual.
Disconnect the 12V device.
The internal breaker will
automatically reset after a
minute or two. Try the 12V
device again. If it happens
again, replace the 12V
device.
The battery in the Instant
Power™ won’t hold a
charge.
Thebatteryisbad(willnot
accept a charge).
Have the battery checked.
SPECIFICATIONS8.
Internal Battery Type Maintenance-free AGM Lead-Acid
Nominal Voltage 12V DC
Capacity 18 Ah
DCPowerOutlet(Max.ContinuousLoad) 15A
Dimensions(HxWxD) 29.21 x 24.13 x 19,66 cm
Weight 8.5 kg.

   Find Your Products By Category