0
Owner's of the Bissell Vacuum Cleaner EASY SWEEP gave it a score of 0 out of 5. Here's how the scores stacked up:
w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
Maintenance and care
6
Emptying dirt cup
The Dirt Cup should be emptied after
each use.
1. Make sure the EasySweep is in the
“OFF” position.
2. Hold the base of the unit over a waste
can to empty.
3. Press the dirt container release button and
empty the contents into the waste can.
Note: The dirt container opens from
the bottom of the EasySweep.
4. Push the dirt container door gently back
into place.
5. Clean exterior surfaces with a soft cloth
dampened with water only. Do not use
a strong detergent or other cleaner – this
may damage the finish. Always unplug
the EasySweep from the charger before
cleaning the surface
Disposal of batteries
See the following instructions to
dispose of the batteries after they have
exceeded the battery life.
WARNING: This product contains a nickel-
cadmium (Ni-Cd) rechargeable battery pack.
According to Federal and State regulations,
removal and proper disposal of Ni-Cd batteries is
required. For removal of the battery pack in your
EasySweep, see instructions below:
1. IMPORTANT: Unplug charger.
2. Remove handle then pry 4 wheels from bot-
tom of sweeper.
3. Remove (6) Phillips head screws on the
bottom cover as shown in picture.
4. Separate top and bottom cover.
5. Remove wire connectors from the battery pack.
6. Keep Battery Pack together – DO NOT sepa-
rate individual batteries. For specific disposal
instructions of batteries, please contact: RBRC
(Rechargeable Battery Recycling Corporation)
1-800-822-8837 or visit www.rbrc.com
7. Discard remainder of product.
Caution: Disconnecting the battery will destroy the
appliance and invalidate the warranty.
6 Screws
Find Your Products By Category
Please Login
